MDF Skirting World: How To Measure And Install MDF Skirting

MDF skirting is a great way to decorate your home without requiring a lot of time, money, or skill. Installing MDF skirting around your house is just as easy as it sounds. MDF (medium density fiberboard) is a type of wood used for constructing interior walls and exterior walls in many homes. 


Skirting is an essential part of finishing off any home’s appearance, giving you a clean and professional finish that will make your house look more appealing. 


If you’re looking to give your home that final touch, then skirting may be the perfect option for you.


What Is MDF Skirting?


MDF is an interior wood panel that is made of wood fibers bonded together with a resin-based adhesive, creating a solid sheet of material that is resistant to moisture and decay. It is available in a range of colors and styles that can be easily screwed or nailed into place. 


MDF is also known as “fiberboard” or “particleboard” and it is made from wood pulp. There are many advantages to investing in MDF skirting. MDF is cheap, extremely durable, and easy to maintain. It can last anywhere from 20 to 40 years or longer, depending on your home’s environment. 


MDF skirting is a great option for homeowners who are looking for a cost-effective skirting option that also looks great. It’s a great way to update your home’s exterior without having to cut into your budget. 


If you’re looking to transform your home’s exterior, MDF skirting is an ideal option.


Measure Your Skirting Board


Before you get started measuring your skirting board, it’s important to know the dimensions of your skirting board. Make a rough sketch of your skirting board to be sure you don’t miss any parts. As a general rule, the skirting board should be 1/4 inch to 3/4 inch smaller than the width of your house. 


This way, you’ll have a clean margin on either side of the skirting board so that the house walls have room to expand and contract without damaging the skirting. Now you know the dimensions of your skirting board, you can move on to measuring the rest of your skirting boards. 


Cut And Prepare The MDF For Installation


MDF boards come in several different sizes and styles, so be sure to get the right one for your needs. If you’re installing interior MDF skirting, make sure you’re measuring the correct board. 


Cut your MDF boards to length and then cut a groove down the middle of the board to allow you to hang it on the wall. 


You’ll also want to cut a groove down the middle of one of the long edges. This is so that the top of the skirting boards can be screwed to the wall. 


Add A Base Layer Of Glue


Before you begin gluing your MDF skirting down, add a base layer of glue on the bottom edge of the boards to help prevent the skirting from sliding. This ensures that the boards don’t move when they’re fastened against the wall. 


Mix up a small batch of recommended glue and spread a thin layer of glue on the bottom edge of each skirting board. Make sure that the skirting boards are flush against the wall and that the long edges of the boards are parallel to each other. 


Place a skirting board against the wall and press it firmly against the wall until the glue dries. Repeat this process for all of the skirting boards. Visit to know more.